热门搜索:

上海楹点检测设备有限公司提供的无损检测仪器设备包括:超声检测(UT);射线检测(RT);渗透检测(PT);磁粉检测(MT);涡流检测(ET);化学用品(CH)、超声波相控阵、超声波测厚仪、超声导波、超声TOFD探伤仪、超声波探头、涡流探伤仪、涡流探头、涡流阵列、磁粉探伤机。代理以下品牌:汕超、美国GE(德国KK)、奥林巴斯(Olympus NDT)、美国磁通(Magnaflux)、DAKOTA等;

    美国uniwest涡流航空检测仪
    • 美国uniwest涡流航空检测仪
    • 美国uniwest涡流航空检测仪
    • 美国uniwest涡流航空检测仪

    美国uniwest涡流航空检测仪

    更新时间:2025-03-07   浏览数:197
    所属行业:仪器仪表 无损检测仪器 探伤仪
    发货地址:上海市宝山区  
    产品规格:美国uniwest涡流航空检测仪
    产品数量:0.00台
    包装说明:原厂包装
    价格:面议
    产品规格美国uniwest涡流航空检测仪包装说明原厂包装

    美国uniwest涡流航空检测仪


    表面完全扫描

    一次扫描,EVI使以前无法实现的螺栓孔多层检查。EVI的表面图像,检验多层或层叠材料的螺栓孔更清晰。

    高速表面扫查

    差动线圈实时状况使得EVI

    量化微分和**的线圈表面

    接近,从而提高和验证检查

    的有效性。.

    平头铆钉表面扫查

    因为金属表面在飞机结构铆

    钉或紧固件位置,裂纹发生

    在铆钉和紧固件之间。

    焊缝表面和近表面扫查

    配备uniwest ecs-3s高速扫

    描仪.

    美国uniwest涡流航空检测仪,EVi 

    UNIWEST  EVi-随着表面成像的功能优化uniwest探伤**的精度


    UNIWEST  EVi-随着表面成像的功能优化uniwest探伤**的精度


    为了保持我们不断提高无损检测的精度和效率的传统,uniwest的电子商务解决方案团队开发的技术较

    先进、操作简易的便携式涡流检测系统— the EVi。

    Evi优点:

    •高速扫查

    •实时线圈耦合条件

    •多层层叠成像

    •复合材料层叠成像

    •孔隙检测全面成像

     

    工业应用:

    •发电

    •航空航天

    •工业

    •管道/核(专业检测)

    •研究与开发行业

     

    工程由uniwest EC解决方案团队,在美国制造,EVi直接与探头和附件的eddyview。

    uniwest**的阵列的标准和可选的信号处理,读出,数据存储、报警和显示。

    功能设置灵活应用的一个新的标准,使用方便,数据的解释和整体操作的准确度比以往

    任何时候都可能在一个便携式检测系统。

    GENERAL

    Dimensions

    • (WxHxD): 13.8" x 8.75" x 2.58"

    • Weight: 7 lb 0 oz without batteries, 9 lb 2 oz with 2 batteries Display Size and Resolution

    • 10.1" WXGA 1280x800 pixels Operating temperature

    • 0 – 45ºC minimum when the battery is charging. 50ºC when operating with a battery or AC but not both.

    MEASUREMENTS

    • Frequency Range: 120 Hz to 15 MHz

    • Gain: 0 dB to 114 dB in 0.1 dB steps

    • Rotation: 0 degrees to 359.9 degrees in 0.1 degree steps

    • Sweep: 0.001 second to 10 second per division

    • Low Pass Filter: 0 to 10 kHz adjustable to 3 digits of precision

    • High Pass Filter: 0 to 10 kHz adjustable to 3 digits of precision

    • Probe Drive: 2 Vp-p, 4 Vp-p, 7 Vp-p (Also variable from 0 to 7 Vp-p in 1 percent steps)

    • Probe Coupling: Monitors the probe to part coupling of a differential probe.

    I N P U T S / O U T P U T S

    • Power connector: 2.5mm IP68 Locking Connector

    • Scanner/Probe Connector: 27 Pin IP68 Connector

    • Probe types: Absolute and differential in either bridge or reflection configuration

    • X and Y Analog Outputs: 2 SMA connectors for differential, absolute, or combination

    • DB25 connector: 8 configurable encoder, sync or other inputs, 8 configurable alarm, multiplexer, or other outputs,

    2 dedicated alarm outputs – TTL and open collector

    • Alarm outputs: TTL & Open Collector (multi I/O), Audio or Headphone (USB to 3.5mm adaptor)

    • Video output: USB will support external monitors (VGA, DisplayPort, or HDMI with adaptors)

    • Ethernet: Remotely control the instrument and retrievedata in real time.

    • USB port A: Interface to storage devices, keyboard

    • USB OTG: Interface to OTG storage devices

    • Exportable Files: Report files, data files, settings files

    POwER

    • Power adaptor requirements: 100-240VAC, 1.4A max

    • Power connector: 10VDC-24VDC

    • Available batteries: 1 or 2 Lithium DR202i or compatible

    • Battery operating time: 5 hours minimum with most scanners, 4 hour recharge rate.

    • Battery protection: SMBus V1.1 safety features. Monitor battery thermistors, disconnects, and circuit protection.

    Batteries are hot swappable.

    • Battery Charging: Instrument will charge batteries using external power


    http://yingdian168.cn.b2b168.com